Site Map

Image Files

[Getting Images]  [Corrected Frames]  [Mosaics]  [Atlas Images]  [PSF Data]

Getting and Using Images

The Catalog Archive Server provides an flexible interface to JPG images for finding charts, cutouts for object lists, and point-and-click navigation. See its documentation (or just browse the list of tools on that site) to learn how to use it. The data access page links to various query forms on CAS to get images by coordinates, or to search for objects from the imaging and spectroscopic catalogs by redshift, object magnitude, color etc., and to retrieve the corresponding data from the SAS.

The Science Archive Server provides two versions of the FITS images, which can be used for quantitative analysis:

The atlas images correspond to what the imaging catalog actually measured its parameters from.

To use the images, it is useful to know the point-spread function (PSF). The SDSS photo software has estimated the PSF from the images, and this information is described in the PSF section below.

Convenient tools for searching for images of interest are available on SAS as well (by run, camcol, field, or by RA and Dec). Additionally, it is able to produce and return an arbitrary FITS mosaic using the corrected frames.

Corrected Frames

The Science Archive Server provides the survey images, called "corrected frames", as "frames-*.fits.bz2" files. See the frame datamodel, which explains the format in detail. These images are calibrated in nanomaggies per pixel, and have had a sky-subtraction applied. The information about the calibration and sky-subtraction is provided, and can thus be backed-out if necessary.

The SAS provides an image search tool, using RUN, CAMCOL, FIELD or RA, DEC, that returns these corrected frames. When searching for RA and DEC, SAS will return the field which is "primary" at that location according to the resolve algorithm.

The sky-subtraction is described in the algorithms page. The "global" method used for creating these images is different from, and far less aggressive than, that applied by the photometric pipeline. The effective smoothing length for the sky background used in these images is around 2 field widths, or 20 arcmin, as opposed to about 2 arcmin for the photometric pipeline.

The image headers have WCS headers that have been corrected to align correctly with the final astrometric solution, but without the polynomial distortion terms. In case the full astrometric solution is desired, it is included as an HDU in the file. The astrometry algorithms page describes how to use the astrometric calibration information.

The images have a very slightly lossy compression applied, and are subsequently very efficiently losslessly compressed with bzip2. The lossy compression results in a relative loss of precision strictly limited to be less than 0.1% in each pixel, which amounts to a standard deviation of about 0.06%. This precision is far less than the fractional noise already present in the images; since the lossy compression is applied after sky subtraction, this statement about the fractional noise is very safe. As Price-Whelan & Hogg (2010) discuss, the lossy compression thus will have no scientific impact even on stacked images.

It is possible to calculate the noise in the images from the images themselves, using information about their dark variance and gain values. The method for doing so is described in the frame datamodel.


The SAS provides a mosaic tool to stitch together corrected frames to form coherent images over larger patches of the sky. These mosaics are created using the swarp utility. The resulting images are calibrated and sky-subtracted just as the corrected frames themselves are. Only the minimal number of "primary" fields necessary are used for each mosaic.

Currently, mosaics are only provided at the native pixel resolution (0.396 arcsec) and with a position angle of zero (north-up).

Atlas images


The photo software cuts out a patch of each corrected frame around each object in order to perform its measurements. There is a set of fpAtlas*.fits files, containing the "postage-stamp" images for individual objects from the photometric object lists. These images are "deblended," so that those atlas images corresponding to child objects contain only the flux that photo decided was part of that object. Atlas images corresponding to parent objects obviously contain all the flux of the children. Note that these images have been sky-subtracted using the photo sky-subtraction method.

These "atlas images" are in a binary heap format that is not easily readable by normal humans; think soft encryption. Also, most standard FITS readers will not decode them, or if they do they will appear as a string of integers rather than an actual image raster.

Note that the atlas images once read in need to be calibrated as described below. Additionally, because they are uncalibrated products, they exist in a separate directory tree from the photoObj files, as described in their data model page.

Stand-alone reader

We have created a standalone code that serves to both read them and as a template library for inclusion in other codes. The code is available as: readAtlasImages-v5_4_11.tar.gz, and can be compiled as follows on Unix:

  1. % make clean
  2. % make

If you are on a big-endian machine, remove -DSDSS_LITTLE_ENDIAN from CFLAGS in the Makefile. Note that most PCs and Macs that are Intel-based are little-endian, so there is no need to change the Makefile.

If you are using Mac OS 10.6, Snow Leopard, you may encounter an error when compiling. If you see error messages that look like this:

cc -o read_atlas_image main.o  -L. -latlas  -lm
Undefined symbols:
  "_phRegionSetFromAtlasImage", referenced from:
      _main in main.o
  "_shRegNew", referenced from:
      _main in main.o

Then you should do

export LDFLAGS=libatlas.a

if you use bash, or

setenv LDFLAGS libatlas.a

if you use tcsh. Then do make clean; make.

To investigate how to use the stand-alone reader, it is helpful to read the help string:

% read_atlas_image -h
Usage: read_atlas_image [options] input-file row output-file
Your options are:
       -?      This message
       -b #    Set background level to #
       -c #    Use color # (0..ncolor-1; default 0)
       -h      This message
       -i      Print an ID string and exit
       -v      Turn up verbosity (repeat flag for more chatter)

If one wanted to read the r-band atlas image of an object with id=432 in run 752, rerun 20, camcol 3, field 177, one would say:

% read_atlas_image -c 2 432  myAtlasImage.fits

where filters u,g,r,i,z are referred to here as color #s 0,1,2,3,4 respectively. The background level is an artificial offset added to all pixels. The SDSS convention is 1000.

The pixel values in the output images are given in counts, not calibrated quantities. To convert to nanomaggies, one would use the nmgypercount value of the object in question, available in the photoObj file or CAS table.

The standalone programs read_mask (reads fpM files) and read_PSF (reads psField files, see below) are similar; all three are built by the same 'make' command.

Developer Comments

Although the read_atlas_image executable is perfectly functional, many users prefer to link into custom built executables that need to process atlas image data. The code is easily reused for this purpose.

If you look at the code you'll see that it actually manipulates a type called an ATLAS_IMAGE. This contains a field called a master_mask that contains inter alia the bounding box of the atlas image ([rc]{min,max}) in the r band, and offsets to that band (d{row,col}).

Linking the atlas code to scripting languages

Example IDL code that links directly to modified versions of the atlas reader can be found in the photoop product distributed with the SDSS software (see pro/atlas/ and associated C code) as well as SDSSIDL (see pro/sdss/ and associated C code).

The atlas images can also be used to reconstruct entire frames. See for example the photoop routine pro/atlas/ and the SDSSIDL routine pro/sdss/ and associate C code.

PSF Data


The photo software fits a PSF as a function of position for every SDSS field. General metadata on the PSF is stored in the photoField file on SAS, which is equivalent to the field table in CAS. Specifically, the psf_width parameter reports the average FWHM of a double Gaussian fit to the PSF. In addition, this file reports the parameters of that fit, as the data model describes.

The psField files additionally contain more detailed metadata about the PSF for a given field, in particular the relevant quantities necessary to reconstruct the full PSF at any position in each frame.

Generic Code to Reconstruct the PSF

The PSF reconstruction can be performed without any specialized tools. For example, to read the psf info from a psField file for the r band, read extension 3 using your favorite FITS reader. Examples in IDL and Python:

IDL> pstruct = mrdfits(psfield_file, 3)
>>> pstruct = pyfits.getdata(psfield_file, ext=3)

(recall u,g,r,i,z == 0,1,2,3,4, which means these bands can be found in extensions 1,2,3,4,5).

The resulting structure can then be used to reconstruct the image. The following IDL code, taken from the SDSSIDL routine "", demonstrates the algorithm to reconstruct the PSF at location (row,col) in the field. The code would be quite similar in Python with NumPy.

    ;assumes they are the same for each eigen
    ;so only use the 0 one


    for i=0l, nb-1 do coeffs[i]=(row*rcs)^(i mod nrow_b) * (col*rcs)^(i/nrow_b)

    for j=0,2 do begin
        for i=0l, nb-1 do begin
            ecoeff[j]=ecoeff[j]+cmat(i/nrow_b,i mod nrow_b,j)*coeffs[i]
    psf = (pstruct.rrows)[*,0]*ecoeff[0]+$

Stand-alone Code

The atlas image reading code discussed above also includes a stand-alone piece of software to read in the PSF:

% read_PSF -h
Usage: read_PSF [options] input-file hdu output-file
Your options are:
       -?      This message
       -h      This message
       -i      Print an ID string and exit
       -v      Turn up verbosity (repeat flag for more chatter) 

To reconstruct the z PSF (i.e. the 5th HDU) at the position (row, col) = (500, 600) from run 1336, column 2, field 51 you'd say:

%  read_PSF 5 500.0 600.0 

The desired PSF would appear as an unsigned short FITS file in; the background level is set to the standard "soft bias" of 1000. If you want a floating point image, change a line in the read_PSF.c; look for

        /* create a float region */